Here is the top rated selected item of other clients getting products related to microcontroller for dummies. For further possibilities, look at our catalog of Microcontroller For Dummies or use the search box.
Table of Contents
- 1 ELEGOO UNO R3 Project Most Complete Starter Kit with Tutorial Compatible with Arduino IDE (63 Items)
- 2 Seeed Studio XIAO ESP32C3 - Tiny MCU Board with Wi-Fi and BLE for IoT Controlling Scenarios. Microcontroller with Battery Charge, Power Efficient, and Rich Interface for Tiny Machine Learning.
- 3 Raspberry Pi Pico RP2040 microcontroller - in US Stock, Ready to Ship (2 Pack)
- 4 Seeed Studio XIAO SAMD21 The Smallest Arduino Microcontroller Based on SAMD21nwith Rich Interfaces for Wearable Devices, 100% Arduino IDE Compatible, Desiged for Projects Need Arduino Micro, 3pcs.
- 5 MakerFocus Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For Ar duino
- 6 HiLetgo 3pcs RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi
- 7 Seeed Studio XIAO RP2040 Microcontroller, with Dual-Core ARM Cortex M0+ Processor, Supports Arduino, MicroPython and CircuitPython with Rich Interfaces.
- 8 HiLetgo RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi
- 9 Pre-soldered Raspberry Pi Pico Microcontroller Mini Development Board with Header,Based on RP2040 Chip, Dual-core Arm Cortex M0+ Processor, High-Performance
- 10 Arduino Nano RP2040 Connect
ELEGOO UNO R3 Project Most Complete Starter Kit with Tutorial Compatible with Arduino IDE (63 Items)
- This kit has all the components you need to start your projects for Arduino and other microcontrollers
- With more than 200Pcs components
- With a precision potentiometer, better quality, power supply module and breadboard
- With jumper wire and f-m DuPont wire
- Not including the controller board
Seeed Studio XIAO ESP32C3 - Tiny MCU Board with Wi-Fi and BLE for IoT Controlling Scenarios. Microcontroller with Battery Charge, Power Efficient, and Rich Interface for Tiny Machine Learning.
- 🌱【Outstanding RF performance】 Powerful ESP32-C3 SoC and U.FL antenna provided that supports WiFi/Bluetooth connection over 100m.
- 🌱【Rich Interface】 There are 11 digital I/O that can be used as PWM pins and 4 analog i/o that can be used as ADC pins. It supports UART, IIC, and SPI serial communication ports, also including IIS (Internet Information Services).
- 🌱【Thumb-size Design】 21 x 17.5mm overall dimension, portable and lightweight.
- 🌱【Low power consumption】 Lowest as 44 μA (deep sleep mode), with 4 working modes available.
- 🌱【Onboard battery charge IC】 Supports battery charging, great for various wearable scenarios and wireless IoT applications.
Raspberry Pi Pico RP2040 microcontroller - in US Stock, Ready to Ship (2 Pack)
- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
- 264kB of SRAM, and 2MB of on-board Flash memory
- 26 multi-function GPIO pins
- Low-power sleep and dormant modes
Seeed Studio XIAO SAMD21 The Smallest Arduino Microcontroller Based on SAMD21nwith Rich Interfaces for Wearable Devices, 100% Arduino IDE Compatible, Desiged for Projects Need Arduino Micro, 3pcs.
- 🌱【Powerful CPU】 The Seeeduino XIAO is equipped with an ARM Cortex-M0+ 32bit 48MHz microcontroller, which is three times faster than Arduino Uno and Arduino Nano. Furthermore, this Arduino IDE compatible board XIAO has 256KB flash memory and 32KB SRAM.
- 🌱【Rich Interfaces in a Tiny Size】 The device has 14 GPIO pins, each of which has 11 analog channels, 11 digital channels, I2C*1, UART*1, and SPI*1, USB Type-C interface*1 in a tiny space, just 20mm*17.5mm (about the size of your thumb). Seeeduino XIAO is the smallest Arduino compatible board in the Seeeduino series.
- 🌱【Fully compatible with Arduino IDE】 Seeeduino XIAO development board is perfectly compatible with Arduino IDE and you can easily create small projects using the extensive and comprehensive Arduino library. It has a 2.54mm pin pitch and can be used even when inserted into a breadboard because it is an Arduino microcontroller.It has a 2.54mm pin pitch and can be used even when inserted into a breadboard because it is an Arduino microcontroller.
- 🌱【Applications】 Seeeduino XIAO is suitable for Wearable devices, Rapid prototyping, DIY keyboard, USB to multi-channel TTL/USB host mode, etc.
- 🌱【Perfect for Wearable and Tiny Arduino Projects】 This microcontroller has good performance in processing but needs less power. As a matter of fact, it is designed in a tiny size and can be used for Arduino wearable devices and small projects.
MakerFocus Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For Ar duino
- Matters Need Attention: Before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer: WCH 340 product home page: http://www.wch.cn/product/CH340.html; http://www.wch.cn/download/CH341SER_LINUX_ZIP.html (linux should operate fine without the driver); http://www.wch.cn/download/CH341SER_MAC_ZIP.html(MAC); https://www.wch.cn/downloads/COMTransmit_ZIP.html(windows)
- NOTE: If you want it to work on a Mac, please install the diver from this: https://drive.google.com/drive/folders/1phezjJtQW0vav34RoivsAzjF0ugmqjgn?usp=sharing; If you want it to work under Windows 10, You must turn off automatic updates before you install the driver, please install the diver from this: https://drive.google.com/drive/folders/1tl6sVGVduyH1JHfaYdMqeMGKdo-rg3im?usp=sharing
- If you need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html; More details on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html
- Small Ar duino UNO Board: It is a smallest, complete and breadboard friendly board. It has everything that Ar duino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper; More Breadboard Space: Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)
- Specification: The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. Usage: The Nano is 100% compatible with Ar duino, with the same chips ATmega328P and CH340 with the official version
HiLetgo 3pcs RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi
- The MF522-AN module design the circuit of card read by using the original Philips MFRC522 chip.
- Easy to use, low cost, and applicable to equipment development and card reader development etc.
- Applicable for the user who need to design or manufacture the RF card terminal.
- The module can be directly loaded into the various reader molds.
- The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance.
Seeed Studio XIAO RP2040 Microcontroller, with Dual-Core ARM Cortex M0+ Processor, Supports Arduino, MicroPython and CircuitPython with Rich Interfaces.
- 📌【Powerful MCU】 XIAO RP2040 is a microcontroller using the Raspberry RP2040 chip with 264KB of SRAM, and 2MB of onboard Flash memory. This microcontroller has dual-core ARM Cortex M0+ processor, and it can runs at up to 133MHz.
- 📌【Multiple Interfaces】 This version of XIAO have 11 digital pins, 4 analog pins, 11 PWM Pins,1 I2C interface, 1 UART interface, 1 SPI interface, 1 SWD Bonding pad interface.
- 📌【Flexible Compatibility】Support Micropython/Arduino/CircuitPython. Easy project operation: Breadboard-friendly & SMD design, no components on the back.
- 📌【Small Size】 As small as a thumb(20x17.5mm) for wearable devices and small projects.
- 📌【Broad Compatibility】 Pins compatible with Seeeduino XIAO and supports Seeeduino XIAO's Expansion board.
HiLetgo RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi
- The MF522-AN module design the circuit of card read by using the original Philips MFRC522 chip.
- Easy to use, low cost, and applicable to equipment development and card reader development etc.
- Applicable for the user who need to design or manufacture the RF card terminal.
- The module can be directly loaded into the various reader molds.
- The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance.
Pre-soldered Raspberry Pi Pico Microcontroller Mini Development Board with Header,Based on RP2040 Chip, Dual-core Arm Cortex M0+ Processor, High-Performance
- Raspberry Pi Pico Board incorporates Raspberry Pi's own RP2040 microcontroller chip, with dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM and 2MB of on-board Flash memory, as well as 26x multi-function GPIO pins.
- Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces.
- For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available.
- There're also complete development resources and tutorials to help you get started easily, and integrate it into end products quickly.
- Raspberry Pi Pico with pre-soldered header, easy to coneect with another product.
Arduino Nano RP2040 Connect
- The u-blox NINA-W102 radio module makes this the only connected RP2040 option. It gives you full WiFi 802.11b/g/n connectivity, along with Bluetooth and BLE v4.2
- Packed onto this tiny board are a couple of very useful sensors. A built-in mic is there for sound activation, audio control and even AI voice recognition. The six-axis smart IMU with AI capabilities tells the board which way it’s moving, and adds fall sensing and double-tap activation.
- It might be a small board, but the Nano RP2040 Connect packs a hardware punch. It matches the established Arduino Nano form factor, making it the perfect upgrade for projects of all sizes.
- With 16MB flash memory that’s external to the microprocessor, there’s bags of room for your code and storage needs.
- The programmable I/O pins have functions that bigger boards only dream of; 22 digital, 20 with PWM and 8 analog.
- Full support for MicroPython (available in July, 2021). Get a Nano RP2040 Connect, and it comes with a FREE OpenMV license for machine vision projects.
Related Products:
- C Microcontroller Programming For Dummies
- Production Possibilities Curve For Dummies
- Mac Os For Dummies
- Com For Dummies
- 340B For Dummies
- Qam For Dummies
- Gpu For Dummies
- Pos For Dummies
- Wow For Dummies
- 1041 For Dummies
- Pro Se For Dummies
- How To Bbq For Dummies
- Bas For Dummies
- Apa 7 For Dummies
- Idl For Dummies
Last update 2021-09-03. Price and product availability may change.