This is basically the leading selected item of other clients getting products related to ir35 for dummies. For further possibilities, have a look at our full catalog of Ir35 For Dummies or use the search box.
Table of Contents
- 1 OBVIS IR Infrared Remote Control Extender Repeater Cable (10 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit - Black
- 2 9 ft 38/56 kHz IR Extender for Cable Boxes Only Listed in Product Description Section. Do not Buy for AV Stereo Receivers, IR Repeater Kits, TVs
- 3 Gikfun Infrared Diode Led IR Emission and Receiver for Arduino (Pack of 10 Pairs) EK8460
- 4 TNP IR Repeater Extender Infrared Remote Control Hidden System Kit - Infrared IR Emitter Blaster Distribution Extension & Receiver Cable for Cable Box Home Theater AV Component Equipment HDTV
- 5 IR Receiver Extender Mini Infrared Emitter Remote Control Extension Cable with 3.5mm Plug for 38-56kHz Xfinity, Spectrum, Comcast, Fios, Denon, Verizon, Motorola, Explorer, Arris (Single Heads, 10FT)
- 6 Gikfun Digital 38khz Ir Receiver Ir Transmitter Sensor Module Kit for Arduino (Pack of 3 Sets) EK8477
- 7 OBVIS IR Infrared Emitter Extender Cable Extension (10 Feet 3Meter) Single HeadEye 3.5mm
- 8 BAFX Products - Extra IR Receiver for BAFX Products IR (Infrared) Repeater Kit/Remote Control Extender Kits
- 9 RuiLing 1-Pack 3.5mm IR Infrared Emission Line Remote Control Receiver Extension Cord Cable 1m
- 10 Dorhea 4Pcs Digital 38khz Ir Receiver Sensor Module + 4Pcs 38khz Ir Transmitter Sensor Module Kit for Electronic Building Block
OBVIS IR Infrared Remote Control Extender Repeater Cable (10 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit - Black
- This Infrared Repeater Cable applies to all remote control devices from 38 to 56 khz
- IR Repeater Extension controls Audio Video Components in Entertainment Cabinets or Equipment Closets using Existing IR Remote Controls
- Come with adhesive backing sticks directly onto different devices
- 1 Receiver, 1 Emitter, Connects to USB port on TV or home theater device for power
- Total Length: 10 feet - 3 meter - black
9 ft 38/56 kHz IR Extender for Cable Boxes Only Listed in Product Description Section. Do not Buy for AV Stereo Receivers, IR Repeater Kits, TVs
- AVOID RETURNS: USE ONLY WITH CABLE BOXES WITH AN ACTIVE IR IN PORT LABELED IR IN OR EXT. IR (NOT SERIAL) LOCATED ON THE BACK OF THE CABLE BOX. LOOK UP YOUR MAKE AND MODEL NUMBER USER GUIDE ONLINE. REFER TO THE BACK PANEL PAGE. PLEASE EMAIL OR CALL US IF YOU REQUIRE OUR ASSISTANCE. All units are bench tested and working before leaving the factory. Refer to the trouble shooting section on the original package if need be.
- Works with VERIZON FiOS, Comcast, Scientific Atlanta Explorer,Cisco,PACE,Motorola, Arris, and DTA Set Top Boxes with active IR IN, EXT IR or IR Input as stated in the first bullet point section
- WILL NOT WORK WITH: ( IR port reserved for future use) Scientific Atlanta Explorer HDC series 4200,4240,4250,8300,8240,8260 or other HDC models A/V Stereo Receivers, TVs or IR
- REPLACES Cisco/Scientific Atlanta IR Extender 1004648,4029013,4022323
- 27 Years Experience Designing, Manufacturing And Supplying The Cable, Hospitality, and Retail Industry
Gikfun Infrared Diode Led IR Emission and Receiver for Arduino (Pack of 10 Pairs) EK8460
- 10PCS VS1838B Infrared receiver and 10PCS 5mm 940nm IR infrared Emission Tube LED Lamp
- The ir receiver is a small design with a built-in dedicated IC that is highly resistant to interference and can withstand environmental interference.
- The infrared diode's pin is not easy to be oxidized, it is easy to be tinned, and the solderability is good;
- Long service life, no red storm, high reliability
- Suitable for infrared products such as electronic toy remote control, infrared camera, infrared temperature measurement, etc.
TNP IR Repeater Extender Infrared Remote Control Hidden System Kit - Infrared IR Emitter Blaster Distribution Extension & Receiver Cable for Cable Box Home Theater AV Component Equipment HDTV
- An ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet for a clean, stylish look
- IR Repeater system allows you to Control home theater components located behind cabinet doors
- Included with the system is - IR Receiver (2 inches by 1/2 Inch); Hidden IR Repeater Controller (3 1/2 Inches by 2 Inches); 2 dual IR emitters blaster
- Convenient IR confirmation LED with dual frequency to support infrared signals from a wider range of IR remote control such as cable box setup box STB; Support up to six emitter output connections
- Additional IR emitter blaster available for purchase at ASIN: B017LQAKXW; If you need to extend the IR blaster emitter cable, you can use a 3.5mm stereo audio extension cable and a 2.5mm to 3.5mm adapter at one end and a 3.5mm to 2.5mm adapter at the other end
IR Receiver Extender Mini Infrared Emitter Remote Control Extension Cable with 3.5mm Plug for 38-56kHz Xfinity, Spectrum, Comcast, Fios, Denon, Verizon, Motorola, Explorer, Arris (Single Heads, 10FT)
- Hi, if the product you received did not work for you, please do not be angry yet. Just contact us via Message and you will get what you want directly! In this way you don't need to re-tu-rn the product and can save all the toubles! Just a word and you can what you want back!
- Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal. NOTE: Your device must have 'IR' port so the product could work!
- Passes IR communication: Used with an IR Repeater kit to remote control a device, extending remote control ability to any room in the house. NOTE: Your device must have 'IR' port so the product could work!
- Sticks directly onto the AV equipment; Two emitters on a single plug, adhesive backing allows the emitter to be easily attached to the IR eye of your device.
- Multiple heads optional allows you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers.
- The mini stick-on infrared emitter includes a 10 ft cable between the emitter heads and the mini-plug, easily meet your expectation of extending.
Gikfun Digital 38khz Ir Receiver Ir Transmitter Sensor Module Kit for Arduino (Pack of 3 Sets) EK8477
- Note: The white smudge is not corrosion damage, it's flux, can wipe it off with a rag, does not affect the use of the module
- This ir transmitter sensor module is directly launched by a single tube, it requires waveform modulation through the program.
- It is suitable for infrared communication, infrared remote control, apply to a variety of platforms including Arduino/51/AVR/ARM
- With signal indicating LED, easy to observe and debug.
- Pin Definitions: (1) Output (2) Vcc (3) GND
OBVIS IR Infrared Emitter Extender Cable Extension (10 Feet 3Meter) Single HeadEye 3.5mm
- IR emitter extension cable with single eye that is compatible with devices in 38khz(IMPORTANT)
- Plug into IR OUT port for use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers
- Comes with adhesive backing sticks directly onto different devices
- Overall length of Infrared Emitter Extender: 10 feet (3 meter)
- Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and other devices
BAFX Products - Extra IR Receiver for BAFX Products IR (Infrared) Repeater Kit/Remote Control Extender Kits
- IMPORTANT – MUST BE USED WITH BAFX PRODUCTS REPEATER KIT! This IR Receiver is not designed to be plugged directly into a devices IR port. Doing so will not work and may cause undesirable operation of your device.
- EXPAND – Increase & Expand the reach of your current Single Zone BAFX Products IR Remote Control Extender kit! Add more receivers to more rooms to control your cable box, receiver, media player and more from more locations in your home, office or business.
- FUNCTIONALITY – Our IR sensors can receive signals from 25’ away and up to a 45° angle from the remote control. Can be used with any IR remote controls. Cable is 5’ long from tip to tip with actual cable length of 4’ 10”. Works with any Make model of remote controls as long as they use Infrared technology.
- COMPATABILITY – Compatible with the BAFX Products Single Zone IR Repeater / Remote Control Extender Kit ONLY! May not work with other brands of Infrared Repeater Kits! Does NOT work with BAFX Products Triple Zone or Wireless Kits!
- WARRANTY – 1 Year warranty against manufacturing defects provided by BAFX Products. Don’t worry if something goes wrong, BAFX Products is ready to help with friendly USA based support!
RuiLing 1-Pack 3.5mm IR Infrared Emission Line Remote Control Receiver Extension Cord Cable 1m
- Package: 1 piece remote control extenders, light-weight, small-size and solid, commonly used when your receiver is hidden away in a cupboard, in a different room, or behind your TV.
- Connector: Come with a standard universal 3.5mm jack male plug at one end and an IR emitter at the other, 1m cable long enough to position the sensor in anywhere in your house.
- High Sensitivity: Real time transmission without any delay with its high sensitivity sensor. 38kHz frequency range, compatible with various of electronic products and appliances.
- Purpose: Used with an IR Repeater kit to control a device, allow you to extend remote control ability to a location that the remote control or IR repeater system block can't reach.
- Application: Allows you to control A/V component by the existing IR controller, such as set-top box, stereo receiver, car audio system, hard disk player, Satellite TV receiver, CD player, DVD player, Bluray player or other components.
Dorhea 4Pcs Digital 38khz Ir Receiver Sensor Module + 4Pcs 38khz Ir Transmitter Sensor Module Kit for Electronic Building Block
- The infrared transmitter module is directly transmitted by a single tube, and the waveform needs to be modulated by the program.
- Adopt 1838 remote control receiver with high sensitivity.
- with the emission signal indicator LED, easy to observe and debug.
- Can be used for remoter control,Can be compatible with wrobot digital 38KHz IR transmitter sensor.
- Widely used in infrared communication, infrared remote control, apply to a variety of platforms including for Raspberry pi/51/AVR/ARM.
Related Products:
- Ir Spectroscopy For Dummies
- Ir For Dummies
- Lua For Dummies
- Dsm For Dummies
- Bhw Seo For Dummies
- Bow Tie For Dummies
- 3Des For Dummies
- Ecg For Dummies
- Bnp For Dummies
- Ar 15 Built For Dummies
- Vasopressors For Dummies
- Autolayout For Dummies
- Polarization For Dummies
- Boxplots For Dummies
- Bgp Community For Dummies
Last update 2021-09-03. Price and product availability may change.